how to clean dirty pool floats

Guide to Clean Dirty FLoats and Loungers: How to clean Pool Inflatables?

Who doesn’t like swimming? It is one of the most enjoyable activities. However, it will not be wrong to say that this activity is enjoyed in summers the most. Scorching sun and heat in the air make us feel sweaty. Which can be combated with swimming. 

When we say that swimming is the most admired and sought activity in the summers, it doesn’t mean we all have access to a swimming pool. That is when you can buy a swimming pool that can be inflated and deflated according to needs. In this regard, there are many products found online. 

Once you have a portable swimming pool, there will be a need to maintain and keep it clean. For that, you have to have certain materials, know-how of the cleaning procedure, and ideas on cleaning the pools faster. 

In this article, we have helped you in finding the answer to “how to clean pool inflatables?”. Also, you will get familiarize with a guide to clean floats and loungers. Before we start with the first section, let us delve into the parts of the pool. Why do we need to do that? It is so that you are sure which part needs utmost care and which area is sensitive. Besides that, we would want you to know some tips for cleaning inflated pools faster (towards the end of this article). 

Parts of Pool

There aren’t many parts of an inflated pool. It comes with a pump though so that you can inflate it easily. Also, at times there are some external items that enable you to deflate it without much hassle. So, technically speaking, we need to only work around the pipes or valves through which we inflate and deflate. 

Importance of Cleaning a Pools Inflates 

On a serious note, some of us don’t believe in cleaning the inflated pools. Well, it brings health risks to the person who uses a dirty pool. But the question that can arise in your mind is, why it is important to clean pool inflates? The answer is simple. Yet many don’t know about it. 

It is said that anything that is closed without cleaning for too long starts to invite bacteria. These causes pink eye and upset tummy. Since you being an adult or parent don’t want kids to get prone to such bacteria, it becomes necessary to clean the pool. In this regard, experts and pediatricians advise putting the pool in sun for several hours after use. Once it is all dried up, make sure that not a single cm is wet. We have to be sure so that there is no trace of moisture. If there is moisture left we have a huge possibility of harboring bacteria, fungus, and all the other toxic elements. 

That is not it!! 

How to Clean Pool Inflatables?

You still need to be sure about the cleanliness. For that, you must follow a pattern and drill. That is mentioned below in steps so that it becomes easy for you to follow. 

3 Easy Steps – How to Clean Pool Floats?  

Now that we know about the parts and importance of inflated pools or pool floats, it is time to delve into how to clean. Enlisted below are three easy steps. Follow them as they are and let us know in the comments below whether it helped or not. 

Stage 1: Deflation of the Pool Floats 

Can you clean an inflated pool? The answer could be “yes”. But the question is, “will it really help to clean a pool which is filled with air”? Most likely the answer could be “No”! So, if and when you want to clean a pool float, it is mandatory to deflate. Another reason why we need to deflate them is that an inflated pool is pretty daunting and difficult to clean (reason: it multiplies in size). Once the pool is deflated, you can easily clean the insides and outsides, curves, and all the edges. To make a floated pool deflate, all you need to do is to open the valve. Air will gush out automatically after that and you can clean the pool easily. 

Stage 2: Removal of the Excess Water

However, once you deflate there is another step to follow. Take every drop of water out and make sure extra water is taken out nicely. This will allow you to clean the insides, outsides, and all the other parts of the pool. In case you start cleaning a pool without taking out the water, it will cause a problem. Yes, you will face issues like the cleaning material will become wet, it will irritate, and other concerns will take place. 

Stage 3: Now CLEAN the Pool 

In order to finally clean, you have to use either chemical agents or some natural cleaning agents. There are benefits of both the cleaning processes. However, it is always better to opt for natural means of cleaning because they are easier to remove germs. Chemical agents are also easier in terms of cleaning. But, they are not healthy for kids. Therefore, making the right decision is dependent on your take on the cleaning procedure. 

Natural Ways to Clean Floats and Lounges

Here are some natural ways of cleaning a pool float. Check them out and see if it can help you too.

Olive Oil to Clean a Pool Float

Dirty pool floats may seem difficult to clean. But it is not so. With the use of olive oil, you can easily remove germs that make home inside the pool. For that, all you need is to use oil on the deck of the pool. This will let all the sticky mess out of the pool. Also, in cases where kids are on their own, they mess it up to the extent that you may find gums and tree sap. Those all are removed with the help of olive oil. Since oil is present in almost every kitchen, you can grab it from there and use it with the help of a sponge. To completely clean the mess on the surface of a pool, follow the steps mentioned below.

  • Take a small portion of oil in a bowl.
  • Add mild liquid soap or detergent.
  • Mix these ingredients.
  • Then, apply it with a sponge on the surface of a pool.
  • Rub it gently in a circular motion.
  • After that, take warm water in another bowl.
  • Dip cotton fabric in the water and clean oil from the surface of the pool.

Use of Baking Soda to Degerm Pool

Another natural agent to clean your pool is baking soda. This is also available in most of the houses. If you don’t have it in the kitchen, make sure that you store it for emergency (to clean the pool). Since baking soda is a non-abrasive cleaning agent, it gives amazing results. What does it do? Well, it cleans the grout and tiles (or the floor or base) of the pool. Last but not least, baking soda is amazing because it is a very cheap yet easiest way of cleaning a pool. Following are some steps that you can use to clean the pool.

  • Take 6 tablespoons of baking soda (increase the amount according to the size of pool float).
  • Now take 3 to 4 tablespoons of warm water. Add more water if the mixture is too thick.
  • Mix both. Make sure that the paste is not very thick or runny. Instead, consistency should be that of a pancake mixture.
  • Once the mixture is made, take some in the hand (use gloves if you want) and rub it on the surface of the pool.
  • Clean it off with the help of water.
  • Repeat the process until the entire pool is cleaned.   

White Vinegar Makes A Pool Clean – How?

At times there is white grunge in the pool’s waterline. What do you do to avoid or remove grunge? First of all, you need to understand that these white patches are of calcium deposits. They are not harmful or toxic. But they are supposed to be removed because they make a pool look bad. Vinegar helps in removing such spots. To make sure that the pool floats and lounges are thoroughly cleaned, you can use vinegar. Here is how you can clean:

  • Take a bowl and mix water and vinegar (an equal portion of each ingredient).
  • Now, take a cloth and dip it in the solution.
  • Wear gloves and take some of the solutions in the hands.
  • Scrub and rub it on the surface to remove the white calcium spots.
  • Before filling it again, make sure that there isn’t any vinegar in the pool.

Lemon Juice Degerms the Pool Too!

Shining the surfaces of metal objects (decoration pieces, etc.) is pretty much possible through the use of lemon. It is somehow as good as vinegar. The only difference is the smell. Vinegar doesn’t have a good smell (some people like it though) but lemon has a citrusy smell. To clean pools you can use either lime or lemon. What does lemon or lime do? First of all, it cleans calcium deposits. Also, it removes grime and rust. Here is the procedure to use lemon to clean pool floats.

  • Squeeze big-sized lemons or lime in a bowl. Make sure there is one cup of juice in the bowl.
  • Now add in some salt. You can use 3 to 4 tablespoons to make a slurry.
  • Next, take some of the mixtures in hand (wear gloves if you like or use a sponge if needed) and scrub the surface of the pool.

Note: if the calcium deposit is stubborn, don’t add salt or dilute the juice.

Last Verdict: How to Clean Pool Floats?

The answer to “how to clean inflatable pool float?” is simple: use any of the home remedies mentioned above. You can also use detergents like soap and soft detergents to clean clothes.

Leave a Comment

Your email address will not be published. Required fields are marked *